Materials
We manufacture to even the tightest tolerances and process materials that are difficult to machine.
Our material Know-How
- Aluminium
- E.g. high-strength aluminium EN AW-7075, EN AW-6026LF (lead-free),
EN AW-6082, EN AW-5083, aluminium titanium
- E.g. high-strength aluminium EN AW-7075, EN AW-6026LF (lead-free),
- Stainless steel (PREN*, permeability)
- Ferritic, martensitic & austenitic stainless steel
e.g. 1.4301/1.4307, 1.4305, 1.4021, 1.4404, 1.4435, 1.4571 - Rust-, acid- & heat-resistant stainless steel
(higher component of chromium, nickel & molybdenum; difficult to machine)
e.g. 1.4821, 1.4841, 1.4462 - Duplex stainless steel
(high corrosion & seawater resistance)
e.g. 1.4462, 1.4410, 1.4501, 1.4507 - Non-magnetizable stainless steel
e.g. 1.3952, 1.3964, 1.3960 - Highly heat resisting stainless steel
e.g. 1.4944, 1.4980 - Aviation materials
e.g. 1.4044, 1.4418, 1.4542, 1.4548, 1.4534, 1.4545 - Stainless steel special grades
e.g. 1.4429, 1.4529, 1.4539, 1.4547
- Ferritic, martensitic & austenitic stainless steel
*PREN (Pitting Resistance Equivalent Number):
PREN is a measure of the corrosion resistance of a stainless steel.
In general, the higher the PREN value, the more corrosion-resistant the steel.
Steels with PREN values above 32 are considered to be seawater resistant.
The PREN value is calculated according to the following formula:
PREN = %Cr + 3.3 x %Mo + 16 x %N
- Quality and Engineering Steel
- Structural Steel
e.g. 1.0553, 1.0570, 1.0577 - Case hardening steel alloyed & unalloyed
e.g. 1.6587, 1.7149, 1.7147, 1.7139, 1.7131, 1.5918, 1.5919, 1.1140, 1.1141, ESP65 - Nitriding steel
e.g. 1.8550, 1.8519 - Quenched and tempered steel alloyed & unalloyed
e.g. 1.7227 (42CrMoS4), 1.7225, 1.7213, 1.7218, 1.6582, 1.6580, 1.8159, 1.1223, 1.1221, 1.1201, 1.1191, 1.1180, 1.1181
- Structural Steel
- Tool steel
- e.g. 1.2842, 1.2436, 1.2379, 1.2738, 1.2312, 1.2714, 1.2367, 1.2365, 1.2344, 1.2343
- Free cutting steel
- e.g. 1.0715, 1.0718, 1.0721, 1.0726, 1.0727, 1.0736, 1.0737, 1.0757, ETG100, ETG88
- Titan
- e.g. 3.7035, 3.7164, 3.7165, 3.7235
- Nickel
- e.g. 2.4610, 2.4602, 2.4819, 2.4360, 2.4668, 2.4856, 2.4952
- Hastelloy®, Inconel®, Monel®, etc.
- Brass
- Copper
- Bronze
- Nickel silver
- Plastics
- PA, POM, PEEK
- Special materials/special alloys
- Suitable for: extreme operating temperatures, special magnetic applications (permeability), highest strength, corrosive & particularly punishing operating conditions
- Materials in all versions
- Tubes: seamless aluminium tubes extruded over mandrel, stainless steel tube, seamless welded precision steel tubes
- Round bars, square bars, hexagon bars, flat bars, plates
e.g. rolled steel (42CrMoS4), rolled aluminium plates (EN AW-5083) - Standard profiles, special profiles, drawing profiles
e.g. extruded aluminium profiles
- More on request
